How to extend the service life of mesh belt furnace
Nov. 16, 2020
How to extend the service life of mesh belt furnace
1. To ensure the integrity of the entire mesh belt furnace equipment connection, under the working state of the experimental circuit, check the different consoles regularly to see if their connectors are intact, and look at the internal operation of the entire mesh belt furnace For some specific temperatures, see if these temperatures are greatly related to the surrounding environment. The temperature of the entire operating environment is usually limited to 0°C to 50°C, not too high or too low.
2. During the operation of the mesh belt furnace, it is necessary to ensure that the humidity does not exceed 85%, there is no conductive dust, metal insulation and electronic software that may be damaged by explosive gases, and corrosive gases must be ensured not to be carried out inside To operate, look at the specific conditions of the entire mesh belt furnace, and place the entire silicon carbide rod in a dry place to prevent the aluminum head from becoming damp.
3. During application, if there is a dark red place, the resistance of each place will not change. Similarly, it is necessary to see whether their resistance value should be used from the beginning. It is also very important to do a good job in the cleaning of the entire mesh belt furnace. The oxides and various impurities inside must be effectively removed in time.
