How to maintain the feeding machine of the mesh belt furnace
Sep. 05, 2020
How to maintain the feeding machine of the mesh belt furnace
The main point of the maintenance of the feeder is to not let the vibrating distributor run at the maximum amplitude for a long time when there is no load. And always check the tightness of all bolts. When replacing the spring plate of the vibrating cloth machine, first tighten the upper and lower connecting fork positioning screws of the shell, that is, after the maintenance screw is tightened, remove the broken spring plate and replace the coil. Ensure that the iron core and armature The air gap is 2±0.1 mm and the working surface is parallel. Check every shift, if necessary, adjust the conveyor belt at any time to make it centered and tight enough to ensure that the conveyor belt runs smoothly.
