What is stainless steel mesh belt

What is stainless steel mesh belt

       Stainless steel mesh belt is a friction-driven machine that transports materials in a continuous manner. Using it, a material transportation process can be formed from the initial feeding point to the final unloading point on a certain conveyor line. It can carry out the transportation of broken materials and the transportation of finished items. In addition to carrying out pure material transportation, it can also be matched with the requirements of the technological process in the production process of various industrial enterprises to form a rhythmic assembly line. Therefore, metal mesh belts are widely used in various modern industrial enterprises.

        The conveyor mesh belt is a conveyor line for washing, drying, cooling and heat treatment. The main materials are A3 low carbon steel, 45# steel, 1Cr13 heat-resistant steel, stainless steel, 304 stainless steel, 1Cr18Ni9Ti stainless steel, 0Cr18Ni14NO2CU2 heat-resistant and acid-resistant steel, etc.

        Conveyor mesh belts are generally divided into ordinary type, reinforced type, balanced type, combined balance type, herringbone type, double-strand balanced type, chain drive mesh belt, B-type mesh belt, etc. Among them, the type B mesh belt is made of a material with strong hardness and is pressed by a special mold. The mesh width is 200mm-3500mm, and this wheel is usually used for positioning and driving. It is widely used in the solidification, solidification, drying of circuit boards in the electronics industry, dripping and drying in the cover industry, and in the food industry for chocolate, biscuits, fish fillets baking, quick freezing, and drying. The edge of the B mesh belt can be used. Chain drive.

Product application range:

        Powder metallurgy, metal heat treatment, quenching, sintering, brazing, roasting, bright, blackening, bearings, carburizing high temperature furnace mesh belt, baffle mesh belt, coating drying line conveyor mesh belt, foam nickel reduction production line Mesh belt, washing machine, hoist, dryer, dryer, curing oven mesh belt. And other heat treatment transportation process equipment.

Troubleshooting：

1. If the mesh belt runs out of direction, adjust the tension shaft at one end of the driven shaft and adjust it slowly. Remember to adjust quickly, which will cause the edge of the mesh belt to be scratched.

2. If the mesh belt jitters, check whether the conveyor rack and the rollers in the conveying tunnel are rusty and resist rotation, and adjust them one by one.

3. If chain-driven mesh belt jumps and runs unstable, check whether the sprocket at both ends of the drive shaft are synchronized and whether the tooth end is excessively worn.